Caldigit S2VR Duo Manual Bedienungsanleitung Seite 1

2 Bay SATA 3Gb RAID Solution Performance, Protected, JBOD User Manual CalDigit, Inc. 1941 Miraloma Ave, Unit B Placentia,

9 Installing the Hard Drive Tray Modules Note: Your S2VR Duo is shipped with the drive modules packaged separately to prevent them from damage

10 Go to “Management Tab” setup password, Voice & E-mail notification  Password (Changing the Password) 1. Select Change Password fro

11 Advanced Mode 1. Select S2VR (Box with serial #) 2. CLICK on Configure RAID 3. CLICK on Advanced tab Video: By changing the settin

12 TURBO Mode You can choose from 30 – 100% of the hard drive capacity, to remain at the desired performance level. Important Note: As is the

13 Configure RAID Level Important Note: You can only modify the Raid settings for you S2VR by using the S2VR Manager software. The hardware RA

14 JBOD Mode Your data will be lost as this process will reformat your drives. Backing up your data on another S2VR Duo is highly recommende

152. The Following system messages will appear, click Ignore. 3. Open the Disk Utility. 4. Create a partition for each hard drive on your S2

165. After you initialize, this is what you should see. (Your S2VR will now serve as an enclosure for 2 individual Hard Drives) 6. Restart you

17 Performance Mode Your data will be lost as this process will reformat your drives. Backing up your data on another S2VR Duo is highly reco

182. After you change your S2VR’s setting into Performance mode, you S2VR Manager will be showing as below. 3. Create Partition via Disk Utili

1Table of Contents Introduction ………………………………………………………………………………………………. 2 Features and benefits of the S2VR DUO ……………………………………………………………...

194. Restart your computer, and your newly configured S2VR is ready to use!  Protected Mode Your data will be lost as this process will

201. Open S2VR Manager, Select Protected mode & follow prompt to format your S2VR to Protected mode. 2. After you change your S2VR’s set

213. Create Partition via Disk Utility, remember to choose ‘Mac OS Extended’ for maximum performance. 4. Restart your computer, and your newl

22 Protected Mode, rebuild information Protected mode combines the best features of striping and mirroring to yield large arrays with high per

23 Demonstration of HDD failure 1. Your S2VR manager will monitor your S2VR Duo and will notify you in the event of a problem. 2. Your S

24 Troubleshooting In the event that your S2VR Duo is not working correctly, please refer to the 3 items below to find out where the

25 Serviceability The S2VR Duo is designed to provide easy disk drive replacement, should a disk drive module need to be serviced, simply unsc

2 Introduction Thank you for purchasing your CalDigit S2VR Duo. CalDigit was established in North Orange County, California, with a team o

3 Remove all components from the shipping container. Retain all boxes and packaging materials In the event that you have to return the prod

4 • PC or Mac with an available PCI-e or PCI-x slot 500 Mhz or faster** • CD-ROM drive • 1GB of RAM minimum **Note: You may be able to inst

5 6. Next, CLICK Install. 7. Finishing Installation, CLICK Continue. 8. Installation complete, CLICK CLOSE.

6 Verify System Profiler Check to make sure that the card has been installed under System Profiler.

7 Install S2VR Manager 1. Double CLICK the application on the provided CD, CalDigit S2VR v1.0.1.pkg. 2. Introduction, CLICK Continue.

84. Installation Successful, CLICK Close. 5. Find the S2VR Manager. Directory: OS drive > Applications > Utilities > CalDig